pedal grab tips
hey, i just got my new kh20 trials and finally just built the courage to thrash it around and start doing fun and difficult trials again, but then realized that it is quite diffic...

I learnt 360 Unispins today!
I learnt 180 unispins a week ago and today i learnt 360s, i can do it with about a 70% sucess rate. Heres a really short video, it the first time i used my gallery. http://...

Qu-ax frame fit question.
I'm going to revamp my old nonsplined trials uni, and I'm looking at the qu-ax hub as the cheapest splined hub on unicycle.com. My question is which frames this will fit, since there a...

length of cranks???
I'm going to buy the koxx hub and cranks and I am going to use them for street/trials. I was wondering what the right crank length for me to use would be. I'm five foot three or four...

is a 20 inch uni aright for muni
i own 20 inch uni with a well treaded 2.125 tyre is it alright for Muni -- dan de man ------------------------------------------------------------------------ da...

Is the Nimbus II frame okay for trials?
I'm looking for a new frame for my Qu-ax splined trials unicycle and I wanted to know if the Nimbus II frame is good for trials. Thanks for any help, Squeegy

Just broke my Kris Holm rim :(
Hello everybody. I was ride home from work today whit my Kris Holm 24" Freeride. I was in the middle of the darknes and then I heard a sound and my wheel blocked. I steped of...

Not falling over on ice
I was out with my dogs for a bit this afternoon, and the paths and trails were really icy. I unicycled down the path without a slip, and got all the way round the ride without being af...

Happy New Year RSU'ites
Just wanted to be the first to wish everyone a Happy New Year! It's just turned 1:45am here in Noo-Zee-land! I might head off on my first MUni ride of the year shortly. Al...

muni lines
[image: http://enhjulingsfolket.se/uploaded/munibeginner.gif] -- goldenchicken ------------------------------------------------------------------------ goldenchi...

nimbu X or nimbus II?
I recently found out i shouldnt be jumping from the heights i am with a torker lx. I was looking for a unicycle that could hold up when i do jump and have found many threads on nimbus ...

turning every time he pedals...
so my roomate and i went out to ride today and he is just learning on a nw 20"sun that i got him for xmas, while i was learning how to hop onto a curb on my new nimbus X my girlfriends...

Are you designing Uni parts? Check this out
I don't know anything more than what's on the site. I certainly haven't ordered anything from them yet, but this sounds like it could be a good tool for unicyclists who are trying to ...

mount question...
in terms of skill levels...are the rollback mount and static mount considered the same thing. or are they totally different and there fore 2 seperate mounts. just wanted to kno . ...

50 mm cranks?
has anyone ever used these? I saw a pair on the miyata website and they looked kinda interesting, sounded fun. so what is your experience with them? -- ntappin <...

Crank arm removal
I have the qu-ax splined uni, and I can't get the cranks off of it. I have the right hex key, I loosened the slot, and I lubed it to bajesus and back, but they won't come off. Any he...

another profile warrenty question
I was wondering if someone bought a profile hub from somebody(assuming that the warrenty does not apply to you since u bought if off someone) and bought new cranks from UDC would the n...

The Freestyle Compilation Video
I've seen people do the compiled videos many times before, but rarely if ever specifically freestyle. So here I am, out to make that freestyle dream a reality. Please send all of you...

Dirty unicycle
Here is a photo of my dirty unicycle after riding my normal route This was just after the rain the track was full of mude. Realy fun to ride/slide in. :-) +-----------...

what size cranks for a 20" trials???
i need some new cranks as i think my 150mm are too long now, i have been riding about 5 months and i see my self as an intermediated if that helps? thanks for any advice oll...

Loctite
If I loctited the nuts that hold the cranks and I check the tightness in the future and the nut moves does the loctite still work? -- cheech --------------------...

KH20" Trials :)
I just ordered my kh 20 from unicycle.au.com and then payed for it and got it the same day :)!! And got great service from them! then i assembled my kh20 trials in 40minutes time...

I got one, now what?
Hi, I'm Kris. I asked for and received a uni for Christmas. It's a Torker CX SE 24". It's the one with the flames and the yellow details. Anyway, this is my first experience with a ...

My very own hate group
I thought you might like to hear about my hate group. I find it hilarious, and it's a group of people that I don't feel bad about making fun of. 'My hate group' (http://uww.faceb...

bike
I can't help but cringe when I see that annoying b*ke thing. What is the purpose of censoring the bike. I love biking, what is with the hatred? -- unign -...

Amount of riders for each level?
I remember a thread about this, but search turned up nothing. The question of course is how many people are there -officially- qualified in each level? For example, it would be laid ...

DVD: one tired guy
Hi. I just watched "one tired guy" on DVD. On the backside of the DVD box stands:"Plus interviews,outtakes,bonus footage and more!" Are they hidden(opening by secret botton c...

4 skills away from level 7...
Yep, I'm 4 skills away from level seven! They are: - Hop on wheel 5 times - 180 to the left - 180 to the right - Ride backwards SIF in a circle <...

year end review and resolutions.
*Review*144.5 miles total, longest ride: 7 miles. 20's and 24's variously. *Summary:* Not Enough! *Resolved:* buy a coker and cyclecommute (7 miles each way) at lea...

im almost there. thanks for the encouragement but i could use a little more :)
hey guys, sorry about the poor quality of this vid, but it was all the footage i had. im really really close on 360's now so thansk for the encouragement. i could use a little more tho...

Page: 0  1  2  3  4  5  6  7  8  9  10  11  12  

2017
JanFebMarAprMayJunJulAug
2016
JanFebMarAprMayJunJulAugSepOctNovDec
2015
JanFebMarAprMayJunJulAugSepOctNovDec
2014
JanFebMarAprMayJunJulAugSepOctNovDec
2013
JanFebMarAprMayJunJulAugSepOctNovDec
2012
JanFebMarAprMayJunJulAugSepOctNovDec
2011
JanFebMarAprMayJunJulAugSepOctNovDec
2010
JanFebMarAprMayJunJulAugSepOctNovDec
2009
JanFebMarAprMayJunJulAugSepOctNovDec
2008
JanFebMarAprMayJunJulAugSepOctNovDec
2007
JanFebMarAprMayJunJulAugSepOctNovDec
2006
JanFebMarAprMayJunJulAugSepOctNovDec
2005
JanFebMarAprMayJunJulAugSepOctNovDec
2004
JanFebMarAprMayJunJulAugSepOctNovDec
2003
JanFebMarAprMayJunJulAugSepOctNovDec